ARKU Knowledge Blog

Processing surfaces with the deburring machine

Written by Admin | Dec 9, 2021 11:53:00 AM
A deburring machine processes the entire sheet metal that is passing through, even though the burrs may only occur on the edges. Due to the design, it is inevitable that brushes or abrasive belts leave marks on the sheet metal surface. This is especially true for materials made of stainless steel or aluminum. These metals do not corrode because they are often finished without paint or other coatings. In cases, where the surface is clearly visible, trim parts affect the overall appearance of a product.

For this reason, the materials have some surface texture after deburring process - whether intended or not. However, a deburring machine cannot produce all the surfaces as required by the DIN standards. For obvious reasons: To begin with, the main function of a deburring machine is to remove burrs from sheet metal. These occur on the edges and not on the entire surface.


Ultimately, after deburring, it comes down to personal preference. Some operators and customers are satisfied with the material surface when it exits the machine. For others, this is not suitable. In those cases, it makes sense to add a finishing module to the deburring machine. Depending on the model, it is possible to integrate these modules later on. Operators can thus respond flexibly to the changing demands of their customers. These options ensure that the investment in a deburring machine pays off.

 

“A deburring machine affects the entire sheet metal that is passing through. Even if the burrs only occur on the edges. Due to the design, it is inevitable that brushes or abrasive belts leave marks on the sheet metal surface.”

Andreas Hellriegel, Head of Business Development, ARKU Maschinenbau GmbH